Top 4 Common Causes Of Attic Mold

# 1 A Leaking Roof
If you have a roof leakage, you may see water on your floors and water discolorations on the ceiling. The bright side, you know that you have an issue.

However, if you have a roofing system leakage and it goes unnoticed resulting in moisture build-up in your attic, this will eventually result in mold development that you might not even understand exists.
This is the reason it is important to inspect your attic several times each year, just to make certain that there is no moisture accumulation. Mold inspection services is a must!

– Check for staining of insulation and wood (e.g. rafters, sheathing, joists, attic side of fascia boards, and so on).
– Check roofing valleys (i.e. where two roofing systems join at an angle), which are highly prone to roofing leakages.
– Observe skylights, chimneys, attic windows and any portion of the attic/roof where different products join each other (consisting of flashings). These locations are hotbeds for potential moisture intrusion.
– If you have a vapor barrier installed, check for condensation. Although this is not truly a roofing system leakage, it is, however, an indication of a wetness problem. And wetness problems lead to attic mold problems!
– Make sure no leakages are originating from and around attic plumbing stacks.
The primary step to addressing the moisture cause is to get your roof fixed, then call Valor Mold to remove the mold.
# 2 Missing Insulation or Improperly Installed Insulation
The quest to save money on heating and cooling costs inspires lots of Do-It-Yourselfer’s to install more insulation in their attics.

Sadly, if the incorrect sort of insulation is selected or if it is set up improperly, this can trigger wetness from the lower levels of your house to increase and get caught in the attic.
As we have written in the past, the main reason for mold development is wetness. Your attic is made of the food mold loves to feed upon. Mold removal services is very important to consider.

Concerning the kind of insulation, if you are layering insulation on top of other insulation, ensure you do not use the kind that has paper or foil backing since it serves as a vapor barrier and can trap wetness in the insulation.

Before you decide to add more insulation to your attic, figure out if you need more initially. If you are unsure, call a professional.

# 3 Inadequate Attic Ventilation
Among the problems we have come across in our tasks is the reality that insulation is blocking the ventilation ducts that disperse air in the attic.
The lack of ventilation is another major reason for mold growth in your attic.

Flight approximately the attic meaning activities such as cooking, bathing, showering, etc will produce moisture that will makes it way approximately the attic. If there is poor ventilation, the wetness gets trapped in the attic and can result in mold issues.

Examine your soffit vents and make certain they are without insulation, bird nests, and other particles that could be blocking them and avoiding correct airflow.

If you are not sure if the ventilation is ideal in your attic, get in touch with a house inspector or give us a call so that we can take a look.

# 4 Fans Vented Into The Attic
Mold will grow if there is moisture, food, and heat.
Poor building practices happen when the clothes dryer vents, plumbing vents, cooking area or bathroom fans are vented into the attic.

Clothes dryer exhaust vents, kitchen area exhaust fans and restroom exhaust fans are developed to pump wetness out of your house. Ensure that they are vented to the beyond your home and not in the attic.
Plumbing stacks in the attic can likewise give condensation, which can cause attic mold development. Plumbing stacks can likewise discharge dangerous gases, so make sure that they too do not terminate inside the attic.

If any of your vents are routed into the attic, employ a trustworthy contractor to re-route the vents to the beyond your home.


  • Categories:
  • Uncategorized